From lab bench to production line.

Independent nanofiber machine, process and product engineering — for manufacturers building capacity and investors evaluating it.

years in electrospinning, since 2005
20+
products taken to series production
35+
of nanofiber media produced on lines we built or improved
20M+m²
countries where that media is sold
40+

For manufacturers

You run a line, or you are about to. We make it faster, more uniform and more reliable — and we turn your target spec into a product that passes the test, roll after roll.

For investors

Nanofiber plans look good on paper. We tell you what will actually scale: technology, line, process, team and market — assessed by people who have built and run production.

Services

Seven ways to work with us, from a two-week line audit to a turnkey machine project.

Technical due diligence

Technology maturity, line and process capability, scale-up risk, team and market fit.

For
investors and funds
You get
a decision-ready report and risk matrix

Feasibility and roadmap

Application and market choice, technology and line selection, capacity, CAPEX and OPEX, timeline.

For
companies entering nanofibers
You get
a feasibility study and investment roadmap

Line optimization and troubleshooting

Audits of industrial lines such as Elmarco Nanospider, root-cause analysis of speed, uniformity and yield losses, process and machine upgrades.

For
manufacturers running industrial electrospinning lines
You get
implemented fixes and a before/after performance report

Process and product development

Polymer and solvent selection, DOE, product structure, lamination and a test strategy built around the standard you must pass.

For
producers with a target product
You get
a process recipe, test results and a draft TDS

Line and machine engineering

Custom machine design, or a specification for buying one, pre- and post-treatment, emission control, installation and commissioning.

For
companies building a new line
You get
a design or specification and a commissioned line

Factory systems

Engineering standards, QMS, ERP and bills of materials, cost models and technical data sheets.

For
companies with a new or growing plant
You get
working systems and documentation

Training

Electrospinning fundamentals, line operation, quality and testing for operators and engineers.

For
your team
You get
a training program and materials

Results from real production

Five projects, anonymized. Results were measured in production or by independent laboratories; design figures are marked as such.

+53%

line speed, 8.5 → 13 m/min

A faster Nanospider line with F9 performance held and uniformity tightened

Cross-web variation
27% → 6%
Downtime per roll
35 → 8 min

Read the case →

Melt electroblowing head in operation, glowing red above the collector

140 nm

PP fibers, solvent-free, 720 g/h

A melt electroblowing line designed from a blank sheet

1,400 mm working width, designed for 1.7 million m² a year. Concept to pilot production in 24 months.

Read the case →

Materials, standards, applications

The polymers, standards and applications behind our projects.

Polymers

17 processed, including

  • PA6
  • PA46
  • PAN
  • PVDF
  • PVA
  • PP
  • PPS
  • PES
  • PSU
  • PU
  • PLA
  • PCL
  • PEO
  • PVP
  • PAA
  • Collagen
  • Gelatin
Scanning electron micrograph of a PA6 nanofiber web at 20,000 times magnification
PA6 nanofibers, around 120 nm average diameter. SEM, 20,000×.

Applications

Products taken to series production

  • HEPA and HVAC air filtration
  • Gas turbine and dust collector media
  • Liquid filtration and microfiltration membranes
  • Acoustic media
  • Cosmetic collagen masks
  • Apparel membranes

Standards

Products developed, tested and made to

Air filtration

  • EN 1822 HEPA and ULPA, efficiency at MPPS
  • ISO 16890 general ventilation, ePM1 to ePM10
  • ASHRAE 52.2 MERV ratings
  • EN 779 legacy F and M classes
  • ISO/TS 11155-1 cabin air filters
  • DIN 71460-1 cabin air filters
  • VDI 3926 cleanable media, pulse-jet aging
  • AATCC 193 aqueous liquid repellency

Liquid filtration

  • ASTM F316 pore size and bubble point
  • ASTM F838 bacterial retention
  • Water flux clean water flux and permeability

Apparel membranes

  • ISO 811 waterproofness, hydrostatic head
  • AATCC 127 water resistance, hydrostatic pressure
  • JIS L 1092 water resistance
  • ISO 11092 breathability, RET
  • JIS L 1099 moisture vapor permeability
  • ASTM E96 water vapor transmission

Acoustics

  • ISO 10534-2 sound absorption, impedance tube
  • ASTM E1050 sound absorption, impedance tube
  • ISO 354 sound absorption, reverberation room

Cosmetics

  • ISO 22716 cosmetics GMP
  • Regulation (EC) 1223/2009 EU cosmetic products

Compare two media in seconds

The quality factor, QF = −ln(P) / ΔP, where P is penetration (1 − efficiency), weighs efficiency against pressure drop. Enter two media measured at the same face velocity to see which one does more with less air resistance.

QF compares media only. It does not assign an EN 1822 or ISO 16890 class.

Efficiency, %Pressure drop, Pa Media A Media B

QF, Media A

–

QF, Media B

–

B versus A

–

QF in 1/kPa. The example values are from our PA6 case. Want to move your QF? Talk to us.

Track record

lines built or commissioned
13
industrial lines optimized
11
machines designed from scratch
7
polymers processed
17

Patent WO2012033469, for a roller electrospinning system: a corrugated roller and linear motion unit for producing nanofibers or nanoparticles by electrostatic spinning.

How we work

Most projects follow the same path, and every claim at the end is measured.

  1. 1

    Discovery call

    We listen, ask for your data and tell you honestly whether we can help.

  2. 2

    Assessment

    Line, process, recipe and test data, reviewed on site or from your data room.

  3. 3

    Plan

    Targets, actions, timeline and cost, agreed before work starts.

  4. 4

    Implementation

    On your line, with your team, so the know-how stays with you.

  5. 5

    Verification

    Before-and-after results, at your site or an independent laboratory.

About us

NanofiberXpert is a nanofiber engineering consultancy. We work where chemistry, machines and standards meet: a recipe is only as good as the line that spins it, and a line is only as good as the product it delivers to specification.

Our founder, E. Ekler, has worked with nanofibers since 2005. He is a textile engineer by training (Istanbul Technical University) and the inventor of a patented electrospinning system.

“I have spent more than 20 years with nanofibers, and they still excite me. I believe this technology will make the world a better place: cleaner air, cleaner water, lower energy use in filtration, and cleaner manufacturing, with fewer harmful solvents and no PFAS.”
E. Ekler, Founder
Electroblowing spinneret head designed in-house
An electroblowing head of our own design.

Our expertise

Nanofiber production machine design
Electrospinning and melt electroblowing machines, spinnerets, high-voltage systems, heating and automation
Industrial line performance
Making commercial lines run better, especially Elmarco Nanospider: speed, uniformity, downtime, upgrades
Process optimization
DOE-driven process windows, recipe systems and yield
Nanofiber-based product design
Air and liquid filtration, acoustics, cosmetic masks and apparel membranes, from concept to series production
Polymer and solution chemistry
17 polymers, from PA6, PAN and PVDF to PPS, PES and collagen
Lamination and adhesion
Durable bonding through aging and pleating
Testing and standards
Air, liquid, acoustic and apparel testing to EN, ISO, ASTM, VDI, AATCC and JIS standards
Emission control
Acid-vapor scrubbers up to 3,000 m³/h
Factory systems
QMS, ERP, cost models and technical data sheets

We work in English, Turkish and German (basic). Based in Türkiye, working worldwide.

Start a project

Answer five quick questions and we will point you to the right service and a similar case. Or skip straight to the form.

Email
info@nanofiberxpert.com

We reply within 2 business days to arrange a discovery call. If we can help, we then send a scoped proposal.