PA6 nanofiber media beyond HEPA
500× lower penetration at 31% lower pressure drop, independently verified.
- efficiency at MPPS, up from 99.985%
- 99.99997%
- E95 efficiency at MPPS, target above 99.995%
- 99.9986%
- pressure drop
- 350 → 240 Pa
- to series production
- 5 months
The challenge
A producer running two Nanospider NS1600-8S lines was making PA6 nanofiber media at 99.985% efficiency at MPPS and 350 Pa. Poor uniformity and lamination equipment that was never designed for this product kept it far from the target: 99.99995% at MPPS, an E95 efficiency above 99.995% to stay safe after pleating, and a pressure drop below 240 Pa.
What we did
- Reformulated the PA6 solution chemistry
- Ran a structured DOE to bring fiber diameter below 90 nm and hold total nanofiber basis weight at 0.45–0.50 gsm
- Designed a five-layer substrate–nano–substrate–nano–substrate structure
- Replaced only the lamination system, leaving the main line frame untouched
- Validated at the client's lab on a Palas MFP Nanoplus, then confirmed by an independent laboratory in Germany
The result
At a line speed of 2.7 m/min, the media now reaches 99.99997% efficiency at MPPS at 240 Pa, with an average fiber diameter of 80 nm. Its E95 efficiency at MPPS is 99.9986%, well above the 99.995% target that keeps the media safe after pleating. Penetration is 500 times lower than at the start, pressure drop is 31% lower, and the product went into series production five months after the project began, with the main line frame untouched.
Efficiency figures refer to flat-sheet media tested to EN 1822. EN 1822 filter classes apply to finished filter elements.
Facing something similar?
Tell us about your line or product. We reply within 2 business days.