Nanofiber that stays put on gas turbine media
From 28% to 2% efficiency loss after VDI 3926 aging.
- efficiency loss after VDI 3926 testing
- 28% → 2%
- pressure drop rise after aging
- 48 → 3 Pa
- efficiency loss after pleating
- 20% → 3%
- to series production
- 3.5 months
The challenge
A gas turbine media producer was already selling nanofiber-coated media on an 80/20 cellulose/PET substrate, but the product failed where it mattered. In VDI 3926 aging, nanofibers shed from the surface and pressure drop kept climbing after the first 30 cleaning cycles, and residual pressure drop after aging was 48 Pa higher than before. Customers also lost around 20% of the media's efficiency once it was pleated.
What we did
- Replaced the adhesion chemistry entirely
- Added co-agents to the nanofiber recipe so it bonds with the new adhesion system
- Verified the new media on site through VDI 3926 aging tests and pleating trials
The result
Efficiency loss after VDI 3926 testing dropped from 28% to 2%, and the pressure drop rise after aging fell from 48 Pa to just 3 Pa. After pleating, the media now loses 3% of its efficiency instead of 20%. The improved media went into series production 3.5 months after the project started, on the same line.
Facing something similar?
Tell us about your line or product. We reply within 2 business days.