A melt electroblowing line designed from a blank sheet
Solvent-free nanofibers at industrial width.
- PP fibers, with no solvent
- 140 nm
- throughput
- 720 g/h
- working width, 1.7 million m²/year design capacity
- 1,400 mm
- from concept to pilot production
- 24 months
The challenge
The brief was green manufacturing: nanofibers without solvents, made from an industrially stable, almost inert polymer. PP does not dissolve at room temperature, so solution electrospinning cannot process it, and no commercially available machine met the brief.
What we did
- Designed a multi-nozzle spinneret purpose-built for melt electroblowing
- Designed and integrated a bipolar high-voltage system at +60 kV / −30 kV
- Engineered a modular heating system: 265 °C for PP, with heater power that scales for higher-melting polymers
- Automated the line on a Siemens industrial PC with servo drives, data logging and a 20-inch Siemens touchscreen HMI
- Led the full cycle: 6 months design, 10 months build, 8 months commissioning
The result
The line is in pilot production, spinning PP fibers down to 140 nm at 720 g per hour with no solvent, on a 1,400 mm platform designed for 1.7 million m² a year. Because only the heater power changes between polymers, trials with high-performance PES and PSU are already under way on the same platform.
Facing something similar?
Tell us about your line or product. We reply within 2 business days.