+53% line speed on an industrial Nanospider line

F9 performance held, cross-web uniformity tightened, from the same machine.

line speed, 8.5 → 13 m/min
+53%
cross-web variation in efficiency and pressure drop
27% → 6%
downtime and cleaning per roll
35 → 8 min
from first audit to stable production
8 weeks
Inside an industrial wire-electrode electrospinning line during a DOE study
Inside an industrial wire-electrode electrospinning line during a DOE study

The challenge

A producer of F9 dust-collector media was running a single-unit, 8-wire Nanospider line on the standard supplied recipe. Line speed was capped at 8.5 m/min. Samples taken from the left, center and right of the web differed by up to 27% in filtration efficiency and pressure drop, and each roll change cost 35 minutes of downtime and cleaning.

What we did

  • Two-week on-site audit of the line, process and recipe
  • Re-engineered the airflow in the spinning chamber to stabilize fiber deposition across the full web width
  • Upgraded the adhesion unit so the nanofiber layer bonds reliably at higher speed
  • Reworked the nanofiber recipe for a wider, more stable process window

The result

Eight weeks after the first audit, the line runs at 13 m/min, 53% faster, while the media still meets F9. Cross-web variation in efficiency and pressure drop fell from 27% to 6%, and downtime per roll dropped from 35 to 8 minutes. More media and more consistent quality from the same machine, with no new line investment.

Facing something similar?

Tell us about your line or product. We reply within 2 business days.